330190-XXX-00-05 173679-13 Bently Nevada 3300 XL 8mm Proximity Transducer System
The Bently Nevada 3300 XL 8mm Proximity Transducer System (featuring Proximitor Sensor Model 330190 and Modification Code 173679-13) delivers high-accuracy, non-contact shaft vibration and position monitoring for critical rotating industrial machinery. By converting eddy current gap changes into standard linear voltage signals, it solves the challenge of capturing real-time rotor dynamics on fluid-film bearing equipment like turbines, gearboxes, and large pumps. This system is the global industry standard for predictive maintenance, protecting multi-million-dollar plant assets from catastrophic internal casing contact.
Project Case Study
- Project Location: Cilegon Chemical Processing Plant, Banten Province, Indonesia
- Deployment Timeline: Commissioned in Q2 2025; Active & Monitored through 2026
- Operational Context: Applied to a high-speed Mitsubishi centrifugal gas compressor loop running 24/7 in an unconditioned near-coastal deck environment.
The Technical Challenge & Operational Reality
The facility previously struggled with severe signal drift on its legacy radial vibration loops. Ambient tropical temperatures regularly hit 38°C (100°F) with relative humidity peaking at 98%. This heavy moisture constantly penetrated standard sensor junction enclosures. The ingress degraded standard coaxial connection pins. It repeatedly triggered false high-vibration alarms and subsequent costly, unnecessary emergency process shutdowns.
Field Deployment & Expert Execution
In April 2025, our field engineering team oversaw the complete retrofit of the shaft monitoring system using this exact Bently Nevada 3300 XL 8mm Transducer System (Proximitor 330190 with Factory MOD 173679-13). To satisfy strict API 670 industry compliance standards, our certified machinery diagnostic specialists executed the following rigorous site protocol:
- Verification: Bench-tested each Proximitor module against the target shaft metallurgy using a calibrated micrometer spindle to verify the exact 200 mV/mil scale factor before installation.
- Moisture Isolation: Utilized the rugged structural housing variations of the MOD-coded Proximitor inside IP66-rated local enclosures, completely isolating the sensitive internal RF oscillator circuits from ambient moisture.
- Impedance Matching: Maintained flawless loop impedance across the exact configured system length, ensuring zero signal attenuation across the distance from the machine deck to the local control cabinet.
Verified Long-Term Performance Results
Following over a year of uninterrupted continuous operation under grueling, humid tropical conditions, plant reliability logs confirm zero signal drift and zero hardware failures. The raw buffered outputs from the Proximitor's diagnostic terminals continue to deliver perfectly clean, linear shaft dynamics directly to the plant's 3500 rack system. By eliminating the localized connection failures that plagued older models, the facility successfully avoided a single instance of moisture-driven false tripping. This saved an estimated $140,000 in avoided unplanned production downtime during the 2025-2026 operational cycles.
Product FAQ
Q: Can this 3300 XL 8mm Proximitor module be swapped directly into a legacy 7200 series system?
A: No. The 3300 XL series operates on entirely different electrical tuning properties and connector architectures than the old 7200 series line. If you are upgrading, you must swap out the complete sensor loop, including the probe, extension cable, and this Proximitor sensor, to ensure correct calibration.
Q: What power input and reference ground constraints are needed for the 330190 module?
A: It requires a standard industrial negative DC supply voltage ranging from -17.5 Vdc to -26 Vdc (typically -24 Vdc). The sensor operates on a negative rail architecture; connecting it directly to a standard positive 24V supply loop will permanently fry the inner conditioning circuitry.
Q: Does the MOD 173679-13 design allow for remote diagnostics without halting the machine?
A: Yes. The front plate of the module features a dedicated coaxial "OUT" terminal. Your field engineers can plug a handheld oscilloscope or digital voltmeter into this test port to read raw dynamic vibration signatures or check the physical probe gap settings safely while the machine is running.
Recommended Models
| 330106-05-30-20-02-CN | 330105-02-12-15-12-CN | 330104-00-13-10-02-05 |
| 330106-05-30-15-02-CN | 330105-02-12-10-02-CN | 330104-00-13-10-02-00 |
| 330106-05-30-15-02-00 | 330105-02-12-10-02-05 | 330104-00-13-10-01-CN |
| 330106-05-30-10-02-CN | 330105-02-12-10-02-00 | 330104-00-12-10-02-05 |
| 330106-05-30-10-02-05 | 330105-02-12-05-02-05 | 330104-00-12-10-02-00 |
| 330106-05-30-10-02-00 | 330105-00-05-10-02-00 | 330104-00-11-10-02-05 |
| 330106-05-30-05-02-CN | 330104-19-25-10-11-05 | 330104-00-11-05-02-00 |
| 330106-05-30-05-02-00 | 330104-15-23-50-02-00 | 330104-00-10-10-02-CN |
| 330106-00-04-10-02-00 | 330104-15-23-10-02-00 | 330104-00-10-10-02-05 |
| 330105-02-12-50-02-00 | 330104-13-20-50-02-00 | 330104-00-10-10-02-00 |
The Amikon Benefit
• 100% Original | Factory Sealed | Lowest Lead Times
• Get a Quote Now
Our Strength
• 100% Genuine: Only brand-new, factory-sealed Bently Nevada parts
• Massive Stock: Direct availability for both current and obsolete models
• Best Price: Competitive wholesale pricing to lower your procurement costs
• Fast Shipping: Global express delivery via DHL, FedEx, and UPS
• Full Warranty: Comprehensive warranty support on all shipped items
يجب أن تكون رسالتك بين 20-3000 حرف!
